Pipe Replacement Cost Calculator
Answer a few quick questions about your home and pipe material, and we'll size up the job — then arrange a free written estimate for a section repair or a whole-house repipe in PEX, copper or CPVC from a licensed, insured plumber. Upfront pricing, no hidden fees.
Homes Repiped
Customer Rating
Years Experience
Emergency Service
What will your pipe replacement cost?
Repiping costs are driven by pipe material, how much of the system needs replacing, and how hard it is to reach. Pick the options that match your home — we'll show the time on site and job scope, then a licensed plumber provides a detailed written quote.
What do you need done?
· typical time on site shownProperty size
What material do you want?
· unsure is fine — we'll advise on siteHow will we reach the pipes?
· access drives labor and drywall workHow soon do you need us?
Bathrooms & wet areas
Each bathroom, kitchen and laundry adds supply runs, drain lines and fixture connections — the main driver of a repipe.
When pipes need replacing, not patching
One leak is a repair. These six signs mean the pipe itself is failing — and the problem will keep moving to the next section.
Discolored or rusty water
Brown or yellow water from every tap means corrosion is happening inside the pipe, not at one fixture. The interior is narrowing and weakening.
Repeated leaks in different spots
If the last two leaks weren't in the same place, the whole run is at the same age and condition. You're patching a system, not a pipe.
Falling water pressure
Corrosion and scale build up inside galvanized pipe and choke the bore. Pressure drops house-wide as the available diameter shrinks.
You have polybutylene
Gray plastic supply pipe installed roughly 1978–1995 becomes brittle and fails by rupturing without warning. Most plumbers recommend full replacement.
Your home is 50+ years old
Original galvanized steel and early copper are at or past design life. Even without an active leak, the odds of a sudden failure climb sharply.
Damp spots or mold on walls
A recurring damp patch, bubbling paint or musty smell behind drywall usually means a slow pinhole leak inside the wall cavity.
Pipe burst right now?
Shut off the main water valve first — usually where the supply enters the house, in the basement, garage or near the water meter. Then open a low faucet to drain pressure, and cut power to any circuit near standing water before we arrive.
PEX vs. copper vs. CPVC
All three are code-approved and all three will serve you well. The right choice depends on your budget, your home's layout and how long you plan to stay.
PEX
Cross-linked polyethylene
Flexible tubing that routes around obstacles with far fewer fittings, installed quickly with minimal wall openings.
- check_circleFastest install, least drywall damage
- check_circleResists scale, chlorine & freezing
- check_circleLowest overall cost
- remove_circleCan't be exposed to UV or direct sunlight
Best for: whole-house repipes where speed and value matter most.
Copper
Rigid metal
The long-standing benchmark. Rigid, soldered or press-fit, with a proven record stretching back many decades.
- check_circle50+ year service life
- check_circleNaturally antimicrobial, no plastic taste
- check_circleBest resale appeal to buyers & inspectors
- remove_circleHighest material & labor cost
Best for: long-term owners and visible or exposed runs.
CPVC
Rigid plastic
A rigid chlorinated plastic that solvent-welds together and handles hot water temperature comfortably.
- check_circleSits between PEX and copper on price
- check_circleGood hot water temperature rating
- check_circleSimple glued joints, easy to modify
- remove_circleRigid, so more fittings than PEX
Best for: straightforward replacements on a moderate budget.
What a proper repipe includes
These are the items that separate a code-compliant repipe from a quick patch. Each one is listed as its own line in your written estimate.
Permits & inspection
Filed and scheduled for you.
Main shut-off replacement
New valve where required.
Pressure regulator check
Protects your new piping.
New shutoffs at fixtures
Angle stops at each point.
Drywall patching
Access openings patched clean.
Pressure & leak testing
System proven before close-up.
Water heater reconnection
Reconnected and checked.
Cleanup & walkthrough
Space left clean and explained.
Get your pipe replacement quote
Our licensed plumber will assess your system, tell you honestly whether you need a section repair or a repipe, and lay out PEX, copper and CPVC options in writing before any work begins.
All three materials quoted
PEX, copper and CPVC — pick what fits your budget.
Water back each evening
Repipes staged so you're never left without supply.
Upfront Pricing
No hidden fees or surprise charges. Transparent quotes always.
Request received, friend!
Your reference number is PIP-00000. A licensed plumber from your area will call you shortly with your free, detailed pipe replacement estimate.
How It Works
Getting your pipes replaced has never been easier. Four steps from first call to water flowing clean.
Assess The System
We inspect the existing piping, map the runs and tell you honestly whether a repair or a repipe makes sense.
Options & Quote
We explain PEX, copper and CPVC in plain language and give upfront pricing in writing with no hidden fees.
Permitted Replacement
We pull permits, replace the piping to code, pressure test everything and patch the access openings.
Flush & Walkthrough
We flush the new lines until the water runs clear, restore supply and walk you through the completed work.
Homes Repiped
Rating
Years Experience
Service Areas
What Our Customers Say
Trusted by homeowners across the country for reliable, professional plumbing services.
“Connect Plumber saved our home from serious water damage. A pipe burst in our basement at 2 AM and they had a plumber at our door within the hour. The leak was stopped, the pipe was replaced, and they even helped us understand how to shut off the water main for the future.”
James A.
Alabama
“A frozen pipe burst in our attic during a cold snap and we were panicking. Connect Plumber arrived quickly, stopped the flooding, and repaired the damage. They prevented what could have been thousands of dollars in water damage.”
Robert O.
Alabama
“What I appreciated most was the communication. The plumber explained the problem, told me what needed repairing, and answered all my questions before starting the work. No confusing explanations and no unnecessary work.”
Daniel P.
Chicago, IL
Frequently Asked Questions
Repair makes sense when the damage is isolated to one accessible section and the rest of the system is sound. Replacement becomes the better investment when the same pipe fails repeatedly in different places, when corrosion is widespread rather than localized, when you have polybutylene or badly corroded galvanized piping, or when water pressure and discoloration problems appear throughout the house rather than at a single fixture. Our plumbers will tell you honestly which side of that line you're on.
PEX is a flexible cross-linked polyethylene tubing that installs quickly with fewer joints, resists scale and chlorine, and is generally the most cost-effective option. Copper is rigid, extremely durable, naturally antimicrobial, has a 50-plus year track record and is the premium choice, but costs more in both material and labor. CPVC is a rigid plastic that handles hot water well and sits between the two on price. All three are code-approved — we quote the options that suit your home in writing so you can compare.
Most single-family homes are repiped in one to three days. Water is typically restored each evening so you're not without supply overnight. Drywall openings are patched as part of the work, but full painting and cosmetic finish are usually handled separately once the plumbing inspection has passed. Your written estimate includes the expected timeline before any work begins.
Polybutylene is a gray plastic supply pipe installed widely between 1978 and 1995. It reacts with chlorine and oxidizers in treated water, becoming brittle and prone to sudden failure without warning. Because the failure mode is a rupture rather than a slow leak, and because many insurers decline or surcharge homes with it, most plumbers recommend replacing it rather than repairing individual sections.
It depends on how your pipes were routed. Homes with a basement or crawlspace often allow most of the work to happen from below with very few wall openings. Attic routing is common in warmer climates and also avoids much of the drywall. When walls must be opened, we cut clean, minimal access panels and patch them as part of the job — full painting is typically left until after the plumbing inspection passes.
Yes, we offer free, no-obligation estimates for all pipe repair and repiping work. Simply contact us by phone or through the form above. Our licensed plumber will assess your system, explain the PEX, copper and CPVC options available for your home, and provide a detailed, transparent quote before any work begins. There are no hidden fees or surprise charges.
Still have questions? Our licensed plumbers are ready to help.
Get Your Free Estimate Today
One call, a real plumber, and a written estimate — free. PEX, copper and CPVC options quoted side by side, with 24/7 emergency response for burst pipes.
call (833) 997-7008